SPONSORS
2024 ICRBE EXPO |
crank bait blank
Posted by:
joe williams
(---.basf-corp.com)
Date: April 07, 2015 06:01AM
Need some blank suggestions for a couple of crank bait builds.
First, a small cranking rod for square bills and shallow baits such as KVD 1.5's and 200 series Bandits. Open to all brands, but want to keep this blank under 100$. 7' to 7'6" one piece. Second, A medium cranking rod such as KVD 5 & 6xd, Bandit ledge series. Open to all brands but would like a more premium blank. Budget of 160$ or less. 7' to 7'6" one piece Thanks for any help. Joe Re: crank bait blank
Posted by:
Joe Vanfossen
(---.neo.res.rr.com)
Date: April 07, 2015 06:25AM
Swampland's RFLE 765 will fit the bill for both blanks. I took about 1/4" off the tip of mine and trimmed the butt so it finished out at 7'. It's a fantastic cranking blank.
Joe Re: crank bait blank
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: April 07, 2015 07:50AM
Isn't quite 7 feet, but a very nice blank for small cranks - Bushido
CB68/6-12 6'8" 1 MEDIUM MOD-FAST 6-12 1/4 - 5/8 4.5 .415 1.37 CCS numbers are almost identical with the Loomis blend , just a little higher AA. Re: crank bait blank
Posted by:
Lou Auret
(204.16.161.---)
Date: April 07, 2015 08:12AM
I will agree on the RFLE blanks from swampland. Re: crank bait blank
Posted by:
Don @ American Tackle
(---.se.biz.rr.com)
Date: April 07, 2015 08:40AM
Check out the American Tackle Bushido blanks..... they are a super tough, super reliable blank and feel amazing.
For the small cranks I would look at the CB72/8-15 .... 7'2" that is rated for the 3/8-3/4 oz. lures For the 5 & 6 XD.... look at the CB72/12-25 .... 7'2" that is rated for 1/2-1 3/8 oz. or if you want something a little longer check out the CB78/10-20 rated at 3/8-1 1/14 oz. The Bushido blanks will fit into almost every budget and are very popular. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: crank bait blank
Posted by:
joe williams
(---.basf-corp.com)
Date: April 07, 2015 10:26AM
Thanks guy's. I'll check those out. Re: crank bait blank
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: April 07, 2015 11:29AM
Joe,
I have built a number of Phenix Rods Crankbait Sticks for customers and they really like them. Both the solid glass blanks and the composite blanks are really good. Of course the solid glass blanks are heavier than the composites. Check them out. I especially like the Phenix Rods Composite-X Crankbait Blanks. Don Campbell don@sensorfishingrods.com Edited 1 time(s). Last edit at 04/07/2015 11:30AM by Donald R Campbell. Re: crank bait blank
Posted by:
Ryan McBride
(---.wavecable.com)
Date: April 15, 2015 03:03PM
A number of BAS, FLW, SWBA, etc.. guys use our www.rainshadowrodblanks.com in both E-Glass, RX6/E-Glass, and RX7 Graphite. R. McBride Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Sorry, only registered users may post in this forum.
|