SPONSORS
2024 ICRBE EXPO |
help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 12:53PM
I want to build rod for a friend that he planning to use Stella 3000
I don't have access to measure that reel thanks Re: help Stella3000 measurement-KR concept
Posted by:
jim barb
(---.hsd1.fl.comcast.net)
Date: March 16, 2015 01:19PM
I have a Stella on a 7'2" rod. The stripping guide is 18" from the center of the spool. Hope that helps a little. Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 04:58PM
thanks Jim
I would like to add some data: my blank are 7' guide available 25h,12h,8,7 and 6 for the runner reelseat will be installed 27cm from butt Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 04:58PM
double post Edited 1 time(s). Last edit at 03/16/2015 05:03PM by ernest sebastian. Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 04:58PM
double post Edited 1 time(s). Last edit at 03/16/2015 05:02PM by ernest sebastian. Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 04:58PM
double post Edited 1 time(s). Last edit at 03/16/2015 05:01PM by ernest sebastian. Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 16, 2015 04:59PM
double post Edited 1 time(s). Last edit at 03/16/2015 05:00PM by ernest sebastian. Re: help Stella3000 measurement-KR concept
Posted by:
Scott Hovanec
(---.hsd1.pa.comcast.net)
Date: March 17, 2015 04:52AM
Depending on which model 3000 he has, the spool diameters are as follows.
C3000 - 46.5 mm 3000 - 49 mm The C designates the compact body model. This utilizes the 2500 body. The other one is a true 3000 size Re: help Stella3000 measurement-KR concept
Posted by:
ernest sebastian
(112.215.66.---)
Date: March 17, 2015 06:04AM
thx Scott
I dont know yet which one he choose you provide both spool diameters that's great information Re: help Stella3000 measurement-KR concept
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: March 17, 2015 09:24AM
Put a KL16H stripper 19-inches from the tip of the spool axle, followed by an KKL8H, followed by a KL5.5M to a KB5 Choke point. Place the choke 20 inches beyond the stripper then bullseye the 8H and 5.5m with the stripper and the choke. Static load the runners. Test and adjust. Sorry, only registered users may post in this forum.
|