SPONSORS
2024 ICRBE EXPO |
Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: March 14, 2015 09:44PM
Anyone know of a source for cork rings with either no hole, or a hole size smaller than 0.250"? Thanks - Marc Keep it simple - that's all I can handle! Re: Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
eric zamora
(---.lightspeed.frsnca.sbcglobal.net)
Date: March 15, 2015 03:56PM
I looked through the list of sponsors to the left and as you perhaps found, nobody lists what you are searching for. there are possibilities, none of which are suppliers so I may send you an email for what I've found. The sources I will send are mainly suppliers for fly rods, generally focused on high quality. If you do not need top level there may be some good options listed.
eric fresno, ca. Re: Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: March 15, 2015 04:44PM
do a google and you can find them
Don't know how long or the type of rod you are building But You can make arbors out of I use 1/4" tape on short handles If real long ?? 1/2" prep the blank and give space so the ends are glued and space so the handle is glued to the blank Bill - willierods.com Edited 1 time(s). Last edit at 03/15/2015 05:15PM by bill boettcher. Re: Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
Bill Sidney
(---.gci.net)
Date: March 15, 2015 10:19PM
try E BAY good source for what you want William Sidney AK Re: Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
Bill Sidney
(---.gci.net)
Date: March 15, 2015 10:19PM
....hit the button twice sorry William Sidney AK Edited 1 time(s). Last edit at 03/15/2015 10:20PM by william G Sidney. Re: Cork Rings - No Hole or Smaller than .250" Hole?
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 16, 2015 10:20AM
Search the internet for your needs, if the sponsors on the left do not carry what you need.
Quite a few suppliers carry cork with no hole in the cork, so you can make any hole size you wish. Good luck Sorry, only registered users may post in this forum.
|