SPONSORS
2024 ICRBE EXPO |
how to get elongated spacing with VW
Posted by:
Paul Luechtefeld
(107.77.83.---)
Date: March 10, 2015 04:55PM
Cant get the right spacing for fish scale pattern Re: how to get elongated spacing with VW
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: March 10, 2015 06:33PM
The spacing can be changed by changing the number after the % sign in the script. There is an explanation in the help menu accessed at the top of the window . In the script builder there is A spacing option under where it says layout threads. Also to get familiar you can click the ? in the script builder window and it will give directions on how to modify things and highlight the part of the window it is referring to in the directions Freddwhy (Rapt-Ryte) Edited 1 time(s). Last edit at 03/10/2015 06:38PM by Fred Yarmolowicz. Re: how to get elongated spacing with VW
Posted by:
Paul Luechtefeld
(107.77.83.---)
Date: March 10, 2015 11:44PM
Ok thank you that's what I've been doing but when I wrap it always come out square must be skipping a step Re: how to get elongated spacing with VW
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: March 11, 2015 01:21PM
Paul,
If I'm recalling correctly once you have the script modified with the spacing factor, you have to do something in a certain order. If you don't follow the sequence correctly it comes out square. I think it had something to do with either pressing or not pressing the refresh button on the right side (but I may be completely wrong). I work off the square so infrequently that when I need to do so I always have to refresh my memory on how to get the display correct. I don't have the software handy at the moment where I can give you a step by step, sorry. If you can't get it after experimenting, try messaging Billy V, I know he covers layouts off the square when he does VW demos at his place. Sorry, only registered users may post in this forum.
|