I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Vimeo video
Posted by: Tom Kirkman (Moderator)
Date: March 08, 2015 07:17PM

Paer Domeij shot this at the recent ICRBE and put together a short video. [vimeo.com]

.............

Options: ReplyQuote
Re: Vimeo video
Posted by: Steven Libby (---.bstnma.fios.verizon.net)
Date: March 08, 2015 07:55PM

well done

Options: ReplyQuote
Re: Vimeo video
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: March 08, 2015 08:31PM

Is that the chuck The Triangle Chuck The big thing very interesting set up

Bill - willierods.com

Options: ReplyQuote
Re: Vimeo video
Posted by: curtis drumm (---.hsd1.md.comcast.net)
Date: March 08, 2015 09:29PM

The triangle chuck is the real deal, I moved ends of the two piece drier to every angle I could

and I could not make it fail or even think about coming loose.

This will replace all other drying chucks, at least mine when they are available.

Curt

Options: ReplyQuote
Re: Vimeo video
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: March 08, 2015 09:46PM

I can not understand why some one does not make something like this i got two of these from Cabellas and NEVER HAD A ROD COME LOOSE when on the dryer and they use Rubber Bands And a set screw to hold it on the motor

[www.rodbuilding.org]

Bill - willierods.com

Options: ReplyQuote
Re: Vimeo video
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: March 08, 2015 09:48PM

Bill, if you got it from Cabelas.......someone does make it!

Options: ReplyQuote
Re: Vimeo video
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: March 08, 2015 09:54PM

Tom

I looked for more but came up empty ?? I don't even know what the name of it is had the darn thing since I started to build Years never needed another chuck had no reason to even look for another

Bill - willierods.com

Options: ReplyQuote
Re: Vimeo video
Posted by: Ken Preston (---.opera-mini.net)
Date: March 09, 2015 12:00AM

Well Bill - the triangle chuck gives you a reason to spend some $$ for a huge improvement

Options: ReplyQuote
Re: Vimeo video
Posted by: Lindsay PELLETIER (---.236.147.77.rev.sfr.net)
Date: March 09, 2015 04:48AM

Thanks for sharing this video :)

Options: ReplyQuote
Re: Vimeo video
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: March 09, 2015 03:30PM

Ken

I have been using two of them for many years and with all the talk of rods falling out of chucks - Why should I get new ones These Will Not and have not failed me in many years
if it aint broke - Don't fix it
Those bands look to be special sized to fit the chuck - I buy a bag of bands from the drug store No special size

Bill - willierods.com



Edited 1 time(s). Last edit at 03/09/2015 03:33PM by bill boettcher.

Options: ReplyQuote
Re: Vimeo video
Posted by: Robert A. Guist (---.dhcp.embarqhsd.net)
Date: March 09, 2015 04:16PM

Hello Paer & Tom.

Thank you for shooting & showing!!

Tight Wraps.

Bob,

New Bern, NC.

Options: ReplyQuote
Re: Vimeo video
Posted by: Bruce Robb (---.gci.net)
Date: March 10, 2015 11:24PM

Very Cool. Next year I gotta go!

Pesco Ergo Sum

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster