SPONSORS
2024 ICRBE EXPO |
Fuji 28mm FPS D28 reel seat
Posted by:
jim jackson
(---.no.no.cox.net)
Date: March 01, 2015 08:30PM
Does anyone have one of these to sell? I am looking for one...
I will certainly listen to suggestions for a similar ID spin seat, for a casting surf rod. This seat fits my reels, even though it's a huge ID... Jim Re: Fuji 28mm FPS D28 reel seat
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: March 01, 2015 09:41PM
I think we need to know what exactly is the seat and size
that is in question. Curt Re: Fuji 28mm FPS D28 reel seat
Posted by:
jim jackson
(---.no.no.cox.net)
Date: March 01, 2015 10:19PM Re: Fuji 28mm FPS D28 reel seat
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: March 02, 2015 07:41PM
I have rather large spin seats I got several years agow never used one collecting dust, I will be in my shop tomorrow I will
check the size if the same I will send you how many you need I have five free I will never use them I have stayed with fresh water only. Curt Re: Fuji 28mm FPS D28 reel seat
Posted by:
jim jackson
(---.hsc.tulane.edu)
Date: March 03, 2015 04:04PM
I need one!
I am trying for a work-around now, due to these things being harder to find than anticipated! one problem trying a different one with same ID, is the reel feet might not fit well under the hood. That was a problem w/ a previous 28mm i had on this rod. Re: Fuji 28mm FPS D28 reel seat
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: March 03, 2015 06:37PM
The reel feet can also be filed to fit - your not taking half the feet off just filing them to fit the hoods
I see a lot of 26 seats so if your reels are old ones you may and can shap to fit Bill - willierods.com Re: Fuji 28mm FPS D28 reel seat
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: March 03, 2015 07:43PM
don't think you can use these but here goes anyway, The seats I have are American tackle 5.25" long, 20.00mm I.D.
Sorry Curt Re: Fuji 28mm FPS D28 reel seat
Posted by:
jim jackson
(---.hsc.tulane.edu)
Date: March 04, 2015 05:45PM
Bill, it's the other direction, the hood is too big. I suppose i could have taped the feet, but that's not a particularly attractive fix.
I will go with my "work around". That should do OK. Just a little more effort on my part. Thanks for checking on your seats, Curt. Take care. Jim Re: Fuji 28mm FPS D28 reel seat
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: March 04, 2015 06:49PM
I would suggest talk to your supplier
Sounds like the seat hoods are too large for the reel if you can not use a smaller seat then I am sure there is a seat with different hoods that should fit the reel Bill - willierods.com Sorry, only registered users may post in this forum.
|