SPONSORS
2024 ICRBE EXPO |
Flex coat slip clutch problem
Posted by:
joe ponzio
(---.hsd1.nj.comcast.net)
Date: February 08, 2015 09:15AM
I was considering buying a FC slip clutch but the rod butt dia. is 1.00 and is also x flocked wrapped. The hole dia. in the clutch is too small to fit the rod. So what do you do to make it work??
Joe Re: Flex coat slip clutch problem
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 08, 2015 10:09AM
Joe,
Call Flex Coat. They make chuck disks that have larger holes in them. Be safe Re: Flex coat slip clutch problem
Posted by:
John Cates
(---.lightspeed.austtx.sbcglobal.net)
Date: February 08, 2015 03:59PM
Joe
Call me on Monday and I will help you out. 512-858-7742 Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Flex coat slip clutch problem
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: February 08, 2015 09:44PM Re: Flex coat slip clutch problem
Posted by:
joe ponzio
(---.hsd1.nj.comcast.net)
Date: February 10, 2015 01:25AM
John,
I just found a 13/16 -Didn't know one was made- Thanks Joe Sorry, only registered users may post in this forum.
|