SPONSORS
2024 ICRBE EXPO |
Winn Grips
Posted by:
Chuck Blocker
(---.dia.static.qwest.net)
Date: January 21, 2015 08:48AM
I have a customer who wants a set of Winn Grips. What is the proper way to install them. Re: Winn Grips
Posted by:
Scott Hovanec
(---.sub-70-199-7.myvzw.com)
Date: January 21, 2015 09:08AM
Haven't used the Winn branded ones, but I have installed many TourStars. I use doube sided carpet tape and lighter fluid. Re: Winn Grips
Posted by:
Lance Dupre
(---.lightspeed.nworla.sbcglobal.net)
Date: January 21, 2015 10:28AM
Apply just like any other grip. Ream to size and epoxy them on. Re: Winn Grips
Posted by:
Chuck Blocker
(---.dia.static.qwest.net)
Date: January 21, 2015 12:56PM
Thanks, I have installed many golf grips back in my youth and wondered if these could be done the same way. Re: Winn Grips
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: January 21, 2015 05:35PM
Chuck, I don't know why you could not install them exactly the same as a golf grip. Did you ever have a golf grip come loose? I haven't. Re: Winn Grips
Posted by:
Lance Dupre
(---.lightspeed.nworla.sbcglobal.net)
Date: January 21, 2015 07:00PM
Why go through the extra trouble using double sided tape, lighter fluid and what ever else it takes when you can ream and epoxy it on in just a couple of minutes. Try it out and you'll realize how simple it is. Re: Winn Grips
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: January 21, 2015 07:04PM
Rod Bond will glue almost anything together I fixed a crack in a coffee container Made coffee for about a year after -- Untill i broke the pot on the sink Bill - willierods.com Re: Winn Grips
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: January 22, 2015 03:00PM
By the time you have the grip reamed and your epoxy mxed, using golf grip tape and grip solvent, (not lighter fluid), I will have the grip completely installed. It won't move. Re: Winn Grips
Posted by:
Chuck Blocker
(---.hsd1.fl.comcast.net)
Date: January 22, 2015 07:25PM
Randy, do they need to be reamed to fit. Sorry, only registered users may post in this forum.
|