I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Replacement chuck faces for Flex Coat dryer chucks
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: January 06, 2015 09:30AM

I know that Flex Coat makes replacement faces (rubber faces) for their dryer chucks. However, I can't seem to find a supplier for them right now.
Any thoughts?

Thanks much

Options: ReplyQuote
Re: Replacement chuck faces for Flex Coat dryer chucks
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: January 06, 2015 09:55AM

here
[www.mudhole.com]

Bill - willierods.com

Options: ReplyQuote
Re: Replacement chuck faces for Flex Coat dryer chucks
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: January 06, 2015 11:57AM

Thanks Bill.
I don't know why I didn't see it when I looked there earlier.

Be safe

Options: ReplyQuote
Re: Replacement chuck faces for Flex Coat dryer chucks
Posted by: bill boettcher (---.nwrknj.fios.verizon.net)
Date: January 06, 2015 02:52PM

Just not enough coffee LOL

Bill - willierods.com

Options: ReplyQuote
Re: Replacement chuck faces for Flex Coat dryer chucks
Posted by: Jess Brindisi (---.washdc.fios.verizon.net)
Date: January 06, 2015 05:23PM

I think they also offer them with a different size diameter hole other than 11/16th. I could be mistaken

Options: ReplyQuote
Re: Replacement chuck faces for Flex Coat dryer chucks
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: January 06, 2015 07:45PM

Jess,
Yes, I do believe that they also offer one in either 3/16th or 5/16th if I remember correctly

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster