SPONSORS
2024 ICRBE EXPO |
Batson Tip Top Search
Posted by:
Jim Scott
(---.tampfl.dsl-w.verizon.net)
Date: November 15, 2014 09:35AM
Hello all,
I have exhausted my search of the sponsors. i am looking for two Gunsmoke Frame Gold Ring tip tops. Batson makes it but not in the size i need. i need a 13 (5.2mm) tube and a 10 ring. Link shows the top. Any help is appreciated, [alpsforecast.com] J Scott Englewood, Fl Re: Batson Tip Top Search
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: November 15, 2014 09:57PM
Queston....if they don't make it, how do you expect to find it? Re: Batson Tip Top Search
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: November 16, 2014 06:18AM
Jim,
Since you have indicated that Batson does not make it; have you looked at all of the other guide makers to see if they make it. Or to ask another question, do you have knowledge that Batson made it at one time, but no longer make it and are hoping to find old stock that someone may have? Be safe Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.tampfl.dsl-w.verizon.net)
Date: November 16, 2014 09:06AM
Thank you for the responses so far.
Someone made it. I am assuming it was batson since the broken tips look exactly like the attached picture. It may be a discontinured size or a one off for the manufacturer of the rods, Which is a Quantum Blue Runner #bssu5950 5'9'' 40-60#. I need two tip tops of the size stated above. I have searched PacBay, AT,Kigan, & Batson. I was hoping someone may have some old stock. Regards, J Scott Englewood, Fl Re: Batson Tip Top Search
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: November 16, 2014 12:13PM
Have you talked with Batson? They are very responsive to inquiries.....telephone not email! Re: Batson Tip Top Search
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: November 16, 2014 03:19PM
Look up CUI products. Dennis J. Danku (Sayreville,NJ) Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.tampfl.dsl-w.verizon.net)
Date: November 16, 2014 10:33PM
Phil, i Posted on Saturday, i will check with batson tomorrow.
Dennis, Best i could find there is a 8 ring top with a 7mm tube. Thanks for the link. Re: Batson Tip Top Search
Posted by:
Ryan McBride
(---.wavecable.com)
Date: November 17, 2014 03:34PM
Hi Jim,
Just did a search and this is what I found: [alpsforecast.com] Let us know if you need any more info. Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.hfc.comcastbusiness.net)
Date: November 17, 2014 03:47PM
Thanks Ryan,
that is where i clipped the picture. if you use the drop down menu's and choose the titanium / gold option the next menu down only gives you a choice of 6 for a ring size. and a tube size on the next menu is only 10 i believe. The documents says they have the right sizes. None suppliers i checked carry the top in big enough sizes. Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.hfc.comcastbusiness.net)
Date: November 17, 2014 03:52PM
Ryan, i just realized you are Batson. If you can verify that i can get that ring in the size i need i can notify Get Bit to place an order for me. Let me know what you find out.
i can be reached by phone to discuss as well. your email is hidden, but if you send me a contact number i can call you or reply with my cell. i don't want to post it on the forum. Thank you sir. J Scott Re: Batson Tip Top Search
Posted by:
Chester Kiekhafer
(---.client.mchsi.com)
Date: November 18, 2014 09:21AM
Jim,
It would be good for Ryan to post his response on the thread so we can all learn and expand out knowledge base. Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.hfc.comcastbusiness.net)
Date: November 18, 2014 10:10AM
Good suggestion Chester,
I was only bypassing the forum with my personal contact info Regards J Scott Englewood, Fl Re: Batson Tip Top Search
Posted by:
Grant Darby
(---.tukw.qwest.net)
Date: November 18, 2014 11:51AM
Utmost has them up to a 12......can you shave the finish and make that fit? Re: Batson Tip Top Search
Posted by:
Mick Batson
(---.tukw.qwest.net)
Date: November 18, 2014 11:51AM
I have some of the discontinued Pac Bay LCPNT10 ring 12.0 tubes if you could make it work. $1.00 each. Same colors. Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.hfc.comcastbusiness.net)
Date: November 18, 2014 01:21PM
I PROBABLY CAN. THE TIP SEAMS TO BE SOLID FIBERGLASS AND SHOULDN'T HURT IT TO TAKE A LITTLE OFF I THINK.
Mick, send me some info on how to place the order and i will get it right out. Thanks, JS Re: Batson Tip Top Search
Posted by:
Mick Batson
(---.tukw.qwest.net)
Date: November 18, 2014 03:55PM
Just sent an email to you Jim. Just need an address and we will get them in the mail today. Re: Batson Tip Top Search
Posted by:
Mick Batson
(---.tukw.qwest.net)
Date: November 18, 2014 03:55PM
Just sent an email to you Jim. Just need an address and we will get them in the mail today. Re: Batson Tip Top Search
Posted by:
Jim Scott
(---.hfc.comcastbusiness.net)
Date: November 18, 2014 04:29PM
Thank you Carol @ Utmost.
Your customer service is the absolute best. I will let you know how they look and fit. JS Re: Batson Tip Top Search
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: November 18, 2014 04:52PM
And the shipping from cost to cost is VERY fast i was surprised when I got my orders from them Bill - willierods.com Re: Batson Tip Top Search
Posted by:
Mick Batson
(---.tukw.qwest.net)
Date: November 18, 2014 04:56PM
Thanks - we love what we get to do every day. Sorry, only registered users may post in this forum.
|