SPONSORS
2024 ICRBE EXPO |
New Video...
Posted by:
John Cates
(---.sub-70-195-217.myvzw.com)
Date: November 04, 2014 03:39PM
Click the link below for our latest video on Flex Coat Rod Wrapping Finish application. You know, this is how we do it and it works for us.
Why not take a break from all the political turmoil and watch this video. It features our FM200 Finishing Machine. Roger Seiders demonstrates how to apply two coats of Flex Coat Rod Wrapping Finish on a 7' medium lite spinning rod. Working on the FM200 Finishing Machine makes this final step a breeze. With features like a sliding hand rest tray, free spinning roller supports, self-adjusting chuck, slip clutch, and 200 rpm USA made motor you can finish like the pros. The FM200 can be purchased directly or thru one of our many dealers. Contact us at flexcoat@gmail.com [www.youtube.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: New Video...
Posted by:
Ladd Flock
(---.hsd1.ct.comcast.net)
Date: November 04, 2014 08:15PM
Best 10.02 minutes of my day today. Thanks! Re: New Video...
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: November 05, 2014 11:41AM
John,
Thanks for the video...dido on the best 10.02 minutes of the day! Don Campbell don@sensorfishingrods.com Re: New Video...
Posted by:
Chad Barlongo
(---.hawaiiantel.net)
Date: November 06, 2014 02:04AM
Hello,
I enjoyed watching all your videos when I first started rod-building, and the same goes for this one. Noticed you trim your brush to an ultra-fine point in order to do the narrow section near the tip. Great idea and one I will have to try sometime. Thank you again for sharing. -chad Sorry, only registered users may post in this forum.
|