SPONSORS
2024 ICRBE EXPO |
Inexpensive blackfish blanks?
Posted by:
mike langevin
(---.nycmny.fios.verizon.net)
Date: October 12, 2014 08:07PM
Hi all,
I am checking if anyone can recommend an inexpensive blackfish blank. Hopefully under 70 bucks? Looking for mod or fast action that can handle 12oz sinker. Any ideas? My buddy is short on funds so I'm trying to get him something less expensive. Re: Inexpensive blackfish blanks?
Posted by:
Russell Brunt
(---.lightspeed.miamfl.sbcglobal.net)
Date: October 12, 2014 10:18PM
You could serch for the "Lep" muskie rod offered at bass pro shops. Not sure if they still carry it but worth a try for those on a budget.
Other than that, see if you can find one of the discontinued batson muskie blanks. Russ in Hollywood, FL. Re: Inexpensive blackfish blanks?
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: October 13, 2014 08:12AM
Too bad you didn't post this a couple of days ago, I just wrapped a few glass blanks I had laying around here for this exact purpose for "stock" rods when I go on the boat and people ask to buy something I can sell them something. Re: Inexpensive blackfish blanks?
Posted by:
mike langevin
(---.nycmny.fios.verizon.net)
Date: October 13, 2014 09:45AM
Ha that's me a day late and a dollar short! Billy I used that super tog blank I built yesterday and it's awesome. Re: Inexpensive blackfish blanks?
Posted by:
David Parsons
(---.hsd1.pa.comcast.net)
Date: October 13, 2014 03:34PM
check out mudholes CRB value E-Glass blanks Re: Inexpensive blackfish blanks?
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: October 14, 2014 07:30AM
Hi,
Batson SWB70MH, E Glass fiberglass. I have them. Capt Neil Faulkner Re: Inexpensive blackfish blanks?
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: October 14, 2014 07:30AM
Hi,
Sorry, finger check. Capt Neil Faulkner Edited 1 time(s). Last edit at 10/14/2014 01:23PM by Capt Neil Faulkner. Re: Inexpensive blackfish blanks?
Posted by:
mike langevin
(---.sub-174-236-79.myvzw.com)
Date: October 15, 2014 09:01AM
Cool how much are the batson blanks? Re: Inexpensive blackfish blanks?
Posted by:
Capt Neil Faulkner
(---.dyn.optonline.net)
Date: October 15, 2014 10:45AM
Hi Mike,
You can reach me at 631-567-8049. Neil Capt Neil Faulkner Re: Inexpensive blackfish blanks?
Posted by:
Ryan McBride
(---.wavecable.com)
Date: October 23, 2014 07:17PM
Capt Neil Faulkner Wrote:
------------------------------------------------------- > Hi, > > Batson SWB70MH, E Glass fiberglass. I have > them. thank you Capt Neil! here is the website link to the models: SWB70MH: [www.rainshadowrodblanks.com] Eglass Fiberglass: [www.rainshadowrodblanks.com] Sorry, only registered users may post in this forum.
|