SPONSORS
2024 ICRBE EXPO |
source of size E thread
Posted by:
Rex Mason
(---.sangtx.fios.verizon.net)
Date: October 04, 2014 09:53AM
Rod Maker Magazine
volume 17 Issue 3 page 16 article about "embroidery" patterns on rods Is there a current supplier for Size E thread? I cannot locate any reference to it on the internet. I have a pattern (drying) after wrapping with D thread. thanks Re: source of size E thread
Posted by:
Tom Kirkman
(Moderator)
Date: October 04, 2014 10:07AM
Many component supply dealers still have some left from years ago as it was never very popular. You might try emailing a few and asking. I suspect you'll turn some up.
.................. Re: source of size E thread
Posted by:
Donald Becker
(---.hawaiiantel.net)
Date: October 04, 2014 01:29PM
I stock size E in black nylon. It is in medium spools (about one ounce), It is used for wrapping trolling rods and outriggers.
It is not on our web page, you would need to send an email. For size comparisons (spool capacities for medium size spool): Nylon Size D - 450 yards Nylon Size E - 285 yards Perma Color (NCP) Size D - 300 yards Don Becker Re: source of size E thread
Posted by:
Rex Mason
(---.sangtx.fios.verizon.net)
Date: October 04, 2014 04:38PM
Don
thanks I will be ordering some size e thread in the next couple of weeks Rex Mason Re: source of size E thread
Posted by:
Donald Becker
(---.hawaiiantel.net)
Date: October 04, 2014 08:19PM
Rex Mason Wrote:
------------------------------------------------------- > Don > thanks > I will be ordering some size e thread in the next > couple of weeks > Rex Mason Hi Rex, We will be closing Oct 7, 2014 to Oct 22, 2014 for vacation. Thank you, Don Don Becker Re: source of size E thread
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: October 05, 2014 06:23PM
Are you looking for it in colors? I know people who have some, they've brought it to NERBs gatherings to try and get rid of, but nobody takes it. Re: source of size E thread
Posted by:
David Parsons
(---.hsd1.pa.comcast.net)
Date: October 05, 2014 09:13PM
Try Donart Re: source of size E thread
Posted by:
John E Powell
(---.buffalo.res.rr.com)
Date: October 06, 2014 08:07AM
Rex,
If you send me your mailing address, I'll send you some spools of Gudebrod Size E, I have more than I'll ever use. Sorry, only registered users may post in this forum.
|