SPONSORS
2024 ICRBE EXPO |
looking for a builder within 3hrs from Norwich CT
Posted by:
Herb Ladenheim
(---.lightspeed.wepbfl.sbcglobal.net)
Date: October 02, 2014 10:55AM
I am looking for a CT builder who feels comfortable building a one-piece 11'0" spinning surf rod. Or someone within a 3 hr drive from Norwich, CT.
The blank will be provided. A CTS Vapor Trail 1103. Nothing fancy. No weaving, etc. But insist on nice wraps and clean level finish. Customer will pick-up finished rod. If interested email me: hladen@hotmail.com. Regards Herb Distrib CTS Rod Blanks Re: looking for a builder within 3hrs from Norwich CT
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: October 02, 2014 11:36AM
Message sent. I just built this same blank last week. Attached pictures of guide wraps with clean level finish as requested, lol. Re: looking for a builder within 3hrs from Norwich CT
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: October 02, 2014 03:45PM
Don't worry Herb
You can not do a better then Billy Bill - willierods.com Re: looking for a builder within 3hrs from Norwich CT
Posted by:
Herb Ladenheim
(---.lightspeed.wepbfl.sbcglobal.net)
Date: October 02, 2014 05:48PM
Bill,
Probably not. Thanks, Herb Re: looking for a builder within 3hrs from Norwich CT
Posted by:
Capt. Michael Harmon
(---.mycingular.net)
Date: November 05, 2014 07:59AM
Hey herb, I live on the north fork of long island. I can build that rod for you. I do a lot of surf casting on north and south forks with my custom rods. I will email you some pictures later. When do you need the finished product by? MH Sorry, only registered users may post in this forum.
|