SPONSORS
2024 ICRBE EXPO |
Fiberglass Spigot Material Source
Posted by:
Kevin Stull
(---.google.com)
Date: September 16, 2014 12:20AM
I just picked up a pair of Lamiglass FL9651 blanks from the factory store north of Portland, OR. My intent is to turn them in to 5 or 6 piece travel rods. Does anyone have a good source for spigot material, white or yellow? Thanks! Re: Fiberglass Spigot Material Source
Posted by:
Bill Hickey
(---.nycap.res.rr.com)
Date: September 16, 2014 05:01AM
You might try an outfit called Goodwinds, they are in Washington State. You can get either solid or hollow fiberglass and grahite material for making spigots. Re: Fiberglass Spigot Material Source
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 16, 2014 09:07AM
Kevin,
Depending on the size needed, one can use fiberglass driveway markers that are available at your local hardware store. Be safe Re: Fiberglass Spigot Material Source
Posted by:
gary Marquardt
(141.211.151.---)
Date: September 16, 2014 04:58PM
depending on size I've got a bunch of white fiberglass ice blanks. about .260 butt and a size 7 tip 48" long. let me know if you can use them. Re: Fiberglass Spigot Material Source
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: September 17, 2014 11:07AM
Give Lamiglas a call, they can supply you with exactly what you need. Sorry, only registered users may post in this forum.
|