I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Look no more !!!
Posted by: Donald Newenhouse (---.dhcp.embarqhsd.net)
Date: August 08, 2014 01:08AM

I like turning my grips out doors .Have been looking for something portable that could be tucked away after use , to set my Grizzly drill lathe on . Look no more .. Was out walking my dog tonight . Just happen to come up to an ironing board that someone had put out to the curb ,for garbage pick up .Thought it would be perfect, can be adjusted up or down , for sitting or standing .. Carried it home , and it turned out to meet my needs .
Just thought I would pass that along . It could also fit the bill for anybody that has a small work area , and needs something to set there rod wrapper on .. Just saying ..
Don @ Hobby Rods ..

<<<<DON>>>>
Fort Myers Fla.

Options: ReplyQuote
Re: Look no more !!!
Posted by: Donald R Campbell (---.lsanca.fios.verizon.net)
Date: August 08, 2014 09:33AM

Donald,

It works and you can't beat the price either!

Don Campbell
don@sensorfishingrods.com

Options: ReplyQuote
Re: Look no more !!!
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 10, 2014 12:08PM

Great Idea!

Options: ReplyQuote
Re: Look no more !!!
Posted by: Bill Tune (---.mtjltn.broadband.dynamic.tds.net)
Date: August 11, 2014 11:46AM

I have always thought rod builders were some of the most innovative folks around!

Options: ReplyQuote
Re: Look no more !!!
Posted by: bill boettcher (---.dyn.optonline.net)
Date: August 11, 2014 01:06PM

I use a set of 4 coffie tables that are on a stand with wheels on it
Put one outside clamp to the railing then clamp the lath to the table
They also extend the wrapping area for longer rods

Bill - willierods.com

Options: ReplyQuote
Re: Look no more !!!
Posted by: Bill Eshelman (---.lightspeed.bcvloh.sbcglobal.net)
Date: August 11, 2014 06:35PM

Thanks for a great tip.

Ohio Rod Builders

Canton, Ohio

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster