SPONSORS
2024 ICRBE EXPO |
Chromaseal
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: July 02, 2014 06:47PM
Have a person who wants a few guides changed and need the rod as soon as possible. I use chromaseal usually 2 coats Can I apply a coat and very gently blow dry, then add another coat and blow dry again Whats the earliest time before I can put the Flex Coat on. Thanks Re: Chromaseal
Posted by:
Tom Kirkman
(Moderator)
Date: July 02, 2014 06:49PM
You probably need to check with Scott at RodDancer about that, but generally if I can still smell the CP product, it's not fully dry.
............ Re: Chromaseal
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 02, 2014 07:01PM
Got any NCP thread in the same color Will not look as good as regular nylon -- But Bill - willierods.com Re: Chromaseal
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 02, 2014 07:16PM
If this is a ( off the shelf ) rod They usually use regular nylon -- but no CP ??? Bill - willierods.com Re: Chromaseal
Posted by:
Bill Cohen
(---.dhcp.embarqhsd.net)
Date: July 07, 2014 10:18AM
Here is the reply from Scott Its always best to allow the CP to dry overnight. I don't recommend using a hair dryer to try to speed the process up. Best to go without or use Colorlok thread if in a pinch.
Thanks Scott Parsons Sorry, only registered users may post in this forum.
|