I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Removed post?
Posted by: Cory Byrnes (202.78.16.---)
Date: June 28, 2014 08:13AM

Hey guys,
I posted a few days ago about a rod blank selection I was trying to make. Oddly the post is gone. I have an email because I was following the post but it no longer shows up in the message board and when I use the link attached it says the message cannot be found. Did I accidently delete it myself? Did I cross some line or break a rule? I am sorry if I did. Just curious what happened. You guys are a great help! I hope I did not offend anyone. I have learned a lot just from reading through past messages and would like to continue to do.
Cory

Options: ReplyQuote
Re: Removed post?
Posted by: Scott Kelly (---.sub-70-194-129.myvzw.com)
Date: June 28, 2014 08:24AM


Options: ReplyQuote
Re: Removed post?
Posted by: Cory Byrnes (202.78.16.---)
Date: June 28, 2014 08:45AM

Hey guys,
Just realized whats going on. Should have read the posts about the site change over stuff.
Cory

Options: ReplyQuote
Re: Removed post?
Posted by: Tom Kirkman (Moderator)
Date: June 28, 2014 08:57AM

A few posts got lost in the shuffle yesterday. Please repost. Things should be nearly complete now.

..........

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster