SPONSORS
2024 ICRBE EXPO |
can a flyrod tip (on 2 piece) be fixed 10" from from the tiptop
Posted by:
Sam Slack
(---.rh3.cm.dyn.comporium.net)
Date: June 07, 2014 12:08PM
My question is: can a flyrod tip (on 2 section 9' 4 wt) be fixed when broken about 10 " from the tiptop? Or just cut it off and shorten up the rod, but of course it
drastically changes the action of the rod. Re: can a broken flyrod tip (on 2 piece) be fixed 10" from from the tiptop
Posted by:
Sam Slack
(---.rh3.cm.dyn.comporium.net)
Date: June 07, 2014 12:13PM
My two section flyrod ( 2 section, 9' 4wt) is broken about 10" from the tiptop. Can it be repaired? How? Or must I just reconfigure the guides and add new tiptop to unbroken
second (tip) section? Never repaired any graphite rods and so wonder if all this is at all possible? Thanks... Re: can a flyrod tip (on 2 piece) be fixed 10" from from the tiptop
Posted by:
Tom Kirkman
(Moderator)
Date: June 07, 2014 12:36PM Re: can a flyrod tip (on 2 piece) be fixed 10" from from the tiptop
Posted by:
Sam Slack
(---.rh3.cm.dyn.comporium.net)
Date: June 07, 2014 01:00PM
Thanks Tom Kirkman for the article on repairing graphite rods... Sorry, only registered users may post in this forum.
|