SPONSORS
2024 ICRBE EXPO |
rod case
Posted by:
Daniel Peterson
(---.client.mchsi.com)
Date: May 15, 2014 04:39PM
Does anyone know of a rod case for a one piece 7' spinning rod with the reel on and Microwave guides. I can find a lot of cases up to 55" but nothing longer. Re: rod case
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 16, 2014 06:25AM
The "Pro rod locker bag". A few friends picked up this bag this spring and are very happy with the bag.
Be safe [www.youtube.com] Re: rod case
Posted by:
James Whelan
(---.dyn.optonline.net)
Date: May 17, 2014 09:48PM
Try looking up "Flambeau Outdoors - Bazuka." It may be what you are looking for. Re: rod case
Posted by:
Randy Kruger
(---.cbpu.com)
Date: May 18, 2014 12:11AM
I am using an Flambeau Bazuka, but had to drill one extra hole in the case to let it expand to fit the 7'2" rod I just built, but it will go to 7' already. cost about $50.00, but found it on sale.. Re: rod case
Posted by:
Mike Bradford
(---.war.clearwire-wmx.net)
Date: May 18, 2014 04:48PM
A white PVC pipe large enough around and long enough. Finish it with 2 caps (I use one with a threaded plug and one without). You can spray paint it if it is too utilitarian. Mike Bradfrod R.M.B. Fishing Rods Nampa, Idaho Re: rod case
Posted by:
Harry Bell
(---.dhcp.aldl.mi.charter.com)
Date: May 18, 2014 06:42PM
Problem with PVC is the weight Re: rod case
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: May 19, 2014 09:15AM
You can have them made to length at Harding and Sons. They have both reel on and reel off models.
Terry Re: rod case
Posted by:
Daniel Peterson
(---.client.mchsi.com)
Date: May 19, 2014 05:18PM
Thanks Harding and Sons had just what I needed. Sorry, only registered users may post in this forum.
|