SPONSORS
2024 ICRBE EXPO |
Drier Pulley help
Posted by:
philip hardy
(---.as13285.net)
Date: April 28, 2014 04:44PM
Hi Guys, need some help please.
I'm building up my rod wrapper/drier lathe and need a couple of drier motor pulleys. The ones I am looking for are the aluminum ones not the plastic ones and for the life of me I cant remember who supplies them. Obviously I need to get them shipped over here to the UK. Can anyone remember which wrapper they are fitted to and where I can buy them please? Thanks, Philip Re: Drier Pulley help
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: April 28, 2014 05:32PM
If you live anywhere near an aircraft supply store, get yourself some cable wheels. They come in various sizes and a proper sized "O" ring will fit perfectly. They work great. Re: Drier Pulley help
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 28, 2014 06:15PM
Phillip,
Can you take a picture and take some measurements to shaft size etc. to help determine the correct pulley. If you could take the pictures and post them on the Photo section under equipment, that would be helpful. You can often find the pulleys that you need on the UK big @#$%& site and save overseas shipping. Be safe Re: Drier Pulley help
Posted by:
Tom Kirkman
(Moderator)
Date: April 28, 2014 06:15PM
Taig Tools in AZ possibly. Although I think you could source something more local and do just as well for dryer pulleys.
........... Re: Drier Pulley help
Posted by:
Bill Sidney
(---.gci.net)
Date: April 28, 2014 08:13PM
most large air ports with aircraft parts store will have what you want or the web should get it also an they will have all the spects on the pulley's William Sidney AK Re: Drier Pulley help
Posted by:
John Lentz
(---.hsd1.md.comcast.net)
Date: April 29, 2014 08:22AM
I have purchased pulleys from Renzetti but I am not sure if they will ship to the UK.
John Re: Drier Pulley help
Posted by:
philip hardy
(---.as13285.net)
Date: April 29, 2014 02:30PM
Thanks for all your replies guys.
I have found the pulleys I am after on the Batson site. The drier motor is item "E" but for some reason the pulley is not listed? I have asked my good friend John Repacci to contact them in the hope they can supply me with 3 and John will send them over. John has helped me many times in the past and I have been blessed with making a real friend with him. A true gentleman. Philip Re: Drier Pulley help
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: April 29, 2014 04:15PM
Phillip,
I am glad that you have located the pulleys and source for what you need. Be safe Edited 1 time(s). Last edit at 04/29/2014 04:16PM by roger wilson. Sorry, only registered users may post in this forum.
|