SPONSORS
2024 ICRBE EXPO |
Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Marty Martin
(---.lightspeed.gnvlsc.sbcglobal.net)
Date: April 15, 2014 10:49AM
Of all the MHX blanks, which is the fastest? Especially in the HM line? Re: Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Bob Riggins
(---.se.biz.rr.com)
Date: April 15, 2014 03:23PM
I haven't built on all of them, but the popping blanks in either the regular or HM line are the fastest I have used. Re: Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Bob McKamey
(---.se.biz.rr.com)
Date: April 15, 2014 05:22PM
The HI-Mod MHX Popping blanks are much faster than the MHX Popping Blanks. If you are looking for the fastest tip flex of all MHX blanks, that would be the SB-812 or HM-SB812 MHX blanks, which has a extra fast tip. Bob McKamey Mud Hole Custom Tackle bobm@mudhole.com Re: Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Marty Martin
(---.lightspeed.gnvlsc.sbcglobal.net)
Date: April 16, 2014 09:04AM
Thanks for the reply Bob. I have the Batson RX8 802.75, which I suspect would be pretty close to the SB812. I am looking for something a bit longer, but still fast, for throwing the light jigs from the shore of the inlet, so probably the HM-P903 will be the ticket. Re: Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Bob McKamey
(---.se.biz.rr.com)
Date: April 16, 2014 10:58AM
Actually Todd Vivian just brought a blank to mind that I totally forgot about. The HS981-MHX should be a extra fast model that will be what you are looking for. If you want to shorten it, you could take 3 to 4 inches off the butt or the full length will provide distance. Bob McKamey Mud Hole Custom Tackle bobm@mudhole.com Re: Any MHX Blanks FASTER than HM-P903? Fastest MHX?
Posted by:
Marty Martin
(---.lightspeed.gnvlsc.sbcglobal.net)
Date: April 16, 2014 12:02PM
Just looked at the HS981 in your catalogue. Looks nice. I'll look them both over. Sorry, only registered users may post in this forum.
|