SPONSORS
2024 ICRBE EXPO |
Re: Number of micro guides on a rod
Posted by:
jim spooner
(---.dyn.centurytel.net)
Date: March 10, 2014 06:35PM
Roger,
You said previously: “I was just pushing the envelope a bit more with the suggestion that one could basically use the same spacing as one uses for a spiral or spinning rod”. What I was referring to in my post is that my rods ARE “conventional” casting with all guides on top. You said you’ve been using micros for a long time. You should try greater spacing/less guides and see if there’s any detrimental issues. You may notice improved speed and response. Then report back with your results. Sorry, only registered users may post in this forum.
|