SPONSORS
2024 ICRBE EXPO |
Lamiglas blank ?
Posted by:
Dave White
(---.consolidated.net)
Date: March 03, 2014 04:39PM
Recently purchased some older Lamiglas blanks and was wondering if any of you could shed some light on uses.Two are labeled WR571M,and another is labeled WR572M.Two others are labeled I believe (labels are a little worn)O8C691F.Any info is greatly appreciated.
Thank you Re: Lamiglas blank ?
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: March 03, 2014 05:11PM
Dave,
the two WR blanks are original "Worm Rod" blanks for Bass Fishing. And I'm not sure about the third model. The WR's were built in the 70's and 80's (early). Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Re: Lamiglas blank ?
Posted by:
Dave White
(---.consolidated.net)
Date: March 03, 2014 05:21PM
Thanks Todd Re: Lamiglas blank ?
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: March 03, 2014 06:41PM
I don't recall ever seeing a Lamiglas blank with a model # of O8C691F. Are you sure that is a Lamiglas blank. Their blanks always gave an indication of what the blank was designed for. ie. MB-Mooching, SH-Steelhead, BT- boat , etc. If the model does not have a Lamiglas label but those numbers, I doubt it is a Lamiglas blank. Re: Lamiglas blank ?
Posted by:
Dave White
(---.consolidated.net)
Date: March 03, 2014 08:27PM
After looking at this under a magnifying glass model # is CSC691F.Ring any bells.
Thanks Re: Lamiglas blank ?
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: March 03, 2014 09:02PM
Sorry, but no. Tried to find in the1987 catalog and no listing. Re: Lamiglas blank ?
Posted by:
Dave White
(---.consolidated.net)
Date: March 03, 2014 09:30PM
Don't know but might be earlier.Label says "Lamiglas Ltd. Finest in Fishing" Re: Lamiglas blank ?
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: March 04, 2014 09:34AM
These blanks that you are referencing would be from the 70's maybe into the very early 80's.
Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Sorry, only registered users may post in this forum.
|