SPONSORS
2024 ICRBE EXPO |
Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Torayem Helmy
(---.238.12.213.tedata.net)
Date: February 08, 2014 12:22PM
Dear Experts
I am building Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# i never bought this blank before so i dont have good idea about its measurements also dont know if the following info by Mudhole is accurate so would mind to advise Guide sizes and quantity will be needed also Eva foam grips sizes ( will to use split grips ) and the reel seat size preferable to be Fuji or any good suggestions Thanks Length 6'0" Pieces 1 Line Weight 30 - 80 Action Medium/Heavy Butt OD .5 Tip Size 10 Product Description Titan Jigging Product Weight 5.19 Re: Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Ellis Mendiola
(---.lightspeed.hstntx.sbcglobal.net)
Date: February 08, 2014 06:48PM
E-mail and ask Todd at Mudhole. He will help you select the guides, reel seat, and grips. Re: Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Torayem Helmy
(---.238.46.35.tedata.net)
Date: February 09, 2014 06:39PM
where to find Todd's email ? Re: Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Todd Kreikamp
(---.hsd1.va.comcast.net)
Date: February 10, 2014 08:50AM
What reel are you using wiht this rod? Size 10000 or greater are fairly typical depending on species you are targeting. Most vertical jigging rods have a 40 for a stripper, then go down to 25, 16 and finish out with 12's (for knot clearances) or even 10's. Re: Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Torayem Helmy
(---.238.127.21.tedata.net)
Date: February 10, 2014 10:22AM
USING SALTIGA EXP 6500
THX Re: Phenix Titan Jigging Saltwater Blank 6'0" 1pc 30 - 80# - Building
Posted by:
Chris Beverley
(---.infinity.net.au)
Date: February 10, 2014 11:28PM
40, 25, 16, 12, 12, 12 12 and 12 tip. I'd use titanium K's personally. Sorry, only registered users may post in this forum.
|