SPONSORS
2024 ICRBE EXPO |
Fighting Butt
Posted by:
Chuck Blocker
(---.dia.static.qwest.net)
Date: January 27, 2014 01:44PM
What is the best way to ream one of these out to fit without causing it to split? Re: Fighting Butt
Posted by:
John Cates
(---.sub-70-195-193.myvzw.com)
Date: January 27, 2014 03:18PM
Chuck
Maybe our video can help you. Its short and to the point. Here is the link [www.flexcoat.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Fighting Butt
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: January 27, 2014 03:50PM
Hello Chuck.
What Kind of "Fighting Butt" not "Removable" but what about, Cork(FBCC-1), Straight Tapered Cork(SGFBCC-1), EVA(SPG-EC) Straight Tapered EVA(SGFBE-1), Nylon, Aluminum(PBAF2-G, AUB1-S)? And maybe more to choose from. Tight Wraps. Bob, New Bern, NC. Re: Fighting Butt
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 27, 2014 04:38PM
if the fighting butt is like the one in the video yet has a hole measure the depth of the hole Find a drill bit that fits the hole
Then get the next size up and - buy hand drill it out Bin there cork is soft and it can be done If too large wrap thread over the blank to take up the extra space -- In Wide Diamonds so the glue adheres to the blank and not JUST the thread Bill - willierods.com Sorry, only registered users may post in this forum.
|