SPONSORS
2024 ICRBE EXPO |
stripping guides
Posted by:
larry gach
(---.san.res.rr.com)
Date: January 19, 2014 08:44PM
I am building a 9'0" 5 weight fly rod. Some people recommend using 2 stripping guides ( 10mm and 12mm) while others just call for a single 12mm stripping guide. I can't see how a second stripping guide would improve performance. Any thoughts on this question would be appreciated. Re: stripping guides
Posted by:
Tom Kirkman
(Moderator)
Date: January 19, 2014 08:47PM
Unlikely, but simple enough to find out - tape up both sets and cast the rod. That would probably tell you more than all the forum posts in the world will.
............. Re: stripping guides
Posted by:
Bill Sidney
(---.gci.net)
Date: January 21, 2014 12:19AM
I use one stripper on light FLY rodes an two on the heaver rodes , but it is your call , no clean cut deal , they all work it is just what you want
BILL William Sidney AK Sorry, only registered users may post in this forum.
|