I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Safe Gloves
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: January 16, 2014 12:25PM

Hi All,

Are non powdered latex gloves safe to use with epoxy? Or will these cause fisheyes?

Thanks

Options: ReplyQuote
Re: Safe Gloves
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: January 16, 2014 12:40PM

I am about to do a wet layup of a carbon grip and I only have latex gloves at the moment. I would hate for them to cause me issue when I am finishing the grip.

Options: ReplyQuote
Re: Safe Gloves
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: January 16, 2014 12:41PM

I am about to do a wet layup of a carbon grip. I don't want issues down the road when I finish the grip.

Options: ReplyQuote
Re: Safe Gloves
Posted by: Tom Kirkman (Moderator)
Date: January 16, 2014 01:16PM

They shouldn't case any problems if they're out of the box clean.

............

Options: ReplyQuote
Re: Safe Gloves
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: January 16, 2014 01:56PM

Thanks Tom! Now I can continue my project!

Options: ReplyQuote
Re: Safe Gloves
Posted by: Bruce Tomaselli (---.altnpa.east.verizon.net)
Date: January 16, 2014 06:38PM

I never had any trouble with mine. I use nitrile gloves.

Options: ReplyQuote
Re: Safe Gloves
Posted by: Greg Cudnik (---.hsd1.pa.comcast.net)
Date: January 17, 2014 11:13PM

I use nitrile gloves too when getting in deep with epoxy especially carbon grips. Never had a problem.

Options: ReplyQuote
Re: Safe Gloves
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: January 18, 2014 06:26AM

Thanks guys! Appreciate the feedback.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster