SPONSORS
2024 ICRBE EXPO |
Safe Gloves
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: January 16, 2014 12:25PM
Hi All,
Are non powdered latex gloves safe to use with epoxy? Or will these cause fisheyes? Thanks Re: Safe Gloves
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: January 16, 2014 12:40PM
I am about to do a wet layup of a carbon grip and I only have latex gloves at the moment. I would hate for them to cause me issue when I am finishing the grip. Re: Safe Gloves
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: January 16, 2014 12:41PM
I am about to do a wet layup of a carbon grip. I don't want issues down the road when I finish the grip. Re: Safe Gloves
Posted by:
Tom Kirkman
(Moderator)
Date: January 16, 2014 01:16PM
They shouldn't case any problems if they're out of the box clean.
............ Re: Safe Gloves
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: January 16, 2014 01:56PM
Thanks Tom! Now I can continue my project! Re: Safe Gloves
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: January 16, 2014 06:38PM
I never had any trouble with mine. I use nitrile gloves. Re: Safe Gloves
Posted by:
Greg Cudnik
(---.hsd1.pa.comcast.net)
Date: January 17, 2014 11:13PM
I use nitrile gloves too when getting in deep with epoxy especially carbon grips. Never had a problem. Re: Safe Gloves
Posted by:
Chris Tulk
(---.dsl.bell.ca)
Date: January 18, 2014 06:26AM
Thanks guys! Appreciate the feedback. Sorry, only registered users may post in this forum.
|