SPONSORS
2024 ICRBE EXPO |
need an ice blank
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: January 02, 2014 06:47PM
Ok, so last evenings project of making a couple of simple ice rods went terribly ary when I started to strip some of the old components... lets just say I need a recommendation for a new blank or three... nothing fancy as I don't know how much use it will get. It will be for jigging for panfish with light jigs and plastics and possibly some of the old Genz bugs.
Thanks, Tom Re: need an ice blank
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: January 02, 2014 07:32PM
oops sorry that is a bit of critical info I left out. I would like the blanks to be 24" graphite Re: need an ice blank
Posted by:
Eric Viburs
(---.usar.army.mil)
Date: January 02, 2014 08:02PM
Aside from the Thorne Brothers, MHX also look at Gary's Custom Rods out of Anoka, MN. He has some really nice solid Graphite longer but I have cut then down with great results. like 20.00 I think. Re: need an ice blank
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: January 02, 2014 08:08PM
will do. Thanks for the heads up. Should help pass the cold days when I don't feel like working in the basement and want to be outside!! Re: need an ice blank
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: January 02, 2014 10:44PM
Thomas,
If you are in the Minneapolis area, stop by the house and pick up a blank or two. I have quite a few blanks that I am not going to use, so would be happy to help. Drop me an e-mail - hflier@comcast.net if you are in the area. Be safe Roger Re: need an ice blank
Posted by:
Forrest Peters
(---.wi.res.rr.com)
Date: January 02, 2014 11:12PM
MHX has the noodle rod. I just built one myself. Good for Pan Fish. Lone Wolf Rods "Keep your powder dry and your lines wet" God Bless Re: need an ice blank
Posted by:
Andy Stromsness
(199.67.131.---)
Date: January 03, 2014 09:49AM
the 24" MHX Finesse would be a nice fit too
Andy Stromsness Glacial Lakes Outdoors Re: need an ice blank
Posted by:
Andy Stromsness
(199.67.131.---)
Date: January 03, 2014 09:49AM
the 24" MHX Finesse would be a nice fit too
Andy Stromsness Glacial Lakes Outdoors Re: need an ice blank
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: January 03, 2014 01:05PM
Roger,
thank you for the very generous offering, unfortunatelly I won't be up in that neck of the woods till next hunting season. I appreciate all the suggestions as well. I will be putting in an order today for a couple. Tom Re: need an ice blank
Posted by:
Buzz Butters
(---.static.fdul.wi.charter.com)
Date: January 07, 2014 09:54AM
Mud Hole power noodle, sounds like just what you want. I order them by the dozen and cant build them fast enough.
Buzz Sorry, only registered users may post in this forum.
|