SPONSORS
2024 ICRBE EXPO |
Guides Too Tight!
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: December 31, 2013 12:58PM
Hello all, and Happy New Year.
Just finished up a Trolling rod and double-wrapped the guides, obviously double-foot. I dont believe i wrapped too tight, as I always leave enough wiggle room for final alignment, except now. Anyways, is there any tip or trick to loosening them up just a bit so I can align? Thought about wetting them with water but didnt want to try anything until I asked the experts. Thanks so much. Scott "My biggest fear in life is that when I die, my wife will sell my fishing gear for what I said I paid for it." Re: Guides Too Tight!
Posted by:
Tom Kirkman
(Moderator)
Date: December 31, 2013 01:08PM
The water trick won't necessarily hurt anything and it will indeed swell the thread just at tad. Just make sure to allow plenty of time for the thread to dry all the way through before applying your finish.
........... Re: Guides Too Tight!
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: December 31, 2013 01:11PM
Great Tom, I will give it a shot, thank you sir! Re: Guides Too Tight!
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: December 31, 2013 01:59PM
I think a water based color preserver would work as well as water, and then you have accomplished your final alignment and sealed the thread in one step. Re: Guides Too Tight!
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: December 31, 2013 02:13PM
with maybe a little less time to operate, but I guess not that much. great tip, thanks! Re: Guides Too Tight!
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 31, 2013 02:42PM
With tight guide wraps I have wet my fingers and wet the thread to get them to move When set Ued a water based CP It is water based so no problem Bill - willierods.com Re: Guides Too Tight!
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: December 31, 2013 03:31PM
excellent, thanks Willie! Re: Guides Too Tight!
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: December 31, 2013 03:46PM
When i warp my guides on I will set and glue the handle and seat
Then alien the tip top to the seat or reel Glue it on Then when ready to wrap the guides on I will alian the guides to the top starting at the top and going to the butt Alain as I wrap Bill - willierods.com Re: Guides Too Tight!
Posted by:
Scott Backholm
(---.hsd1.ma.comcast.net)
Date: January 01, 2014 05:15PM
I used a spray bottle to apply warm water, worked like a charm! Thanks Everyone for the help.
Scott Sorry, only registered users may post in this forum.
|