I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

10' spec rod
Posted by: Eddie Anderson (---.73-24.tampabay.res.rr.com)
Date: December 25, 2013 09:49PM

I am asking for blank suggestions. I was asked if I could build a one piece 10' rod for crappy or spec fishing over submerged brush.
he wants a light sensitive blank. All he wants on the rod is a handle and a tip top.

I'd rather be catching!

Options: ReplyQuote
Re: 10' spec rod
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: December 26, 2013 12:34AM

PF1202ML-MHX 10'0" 2 2-8 lb. 1/64 - 1/2 Mod/Fast 3.8 .504 4.5 $29.95

[www.mudhole.com]

Options: ReplyQuote
Re: 10' spec rod
Posted by: Robert A. Guist (---.dhcp.embarqhsd.net)
Date: December 26, 2013 04:12AM

Hello Roger.

The OP is for a one piece.
All the 10' one piece that I have seen are 15-25# or larger.

Good Luck in your search.

Bob,

New Bern, NC.

Options: ReplyQuote
Re: 10' spec rod
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: December 26, 2013 12:57PM

If you want a 1-piece rod, take the blank that I posted, and glue it together. Then you will have a nice light one piece rod blank.

Be safe

Options: ReplyQuote
Re: 10' spec rod
Posted by: Robert A. Guist (---.dhcp.embarqhsd.net)
Date: December 27, 2013 02:14AM

Hello Roger.

That will work!


Tight Wraps.

Bob,

New Bern, NC.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster