SPONSORS
2024 ICRBE EXPO |
Reel seat question
Posted by:
Paul Pipke
(---.vf.shawcable.net)
Date: December 25, 2013 12:03PM
Guys, first off I would like to offer seasons greetings to everyone.
My question is will the treaded hoods from Fuji and AT interchange? I dont have either that I can touch and feel so I was wondering if someone that had both could try for me and see if they both use the same thread pitch? I want to use one of the AT Aero comfort spinning seats but they dont seem to make a hood like the Fuji KDPS locking hood that I can use to put a small carbon grip on? Thanks Paul Re: Reel seat question
Posted by:
Ron Schneider
(---.jsbrcmta02.jnboar.lr.dh.suddenlink.net)
Date: December 25, 2013 12:38PM
The Fuji and the AT threads are slightly different, but the Fuji KDPS16 and HPS16N that we have in stock both worked on the AT Aero16 seat
Merry Christmas! Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: Reel seat question
Posted by:
Paul Pipke
(---.vf.shawcable.net)
Date: December 25, 2013 01:31PM
Awesome, thank you very much!! Re: Reel seat question
Posted by:
Jeremy Johnson
(---.mycingular.net)
Date: December 25, 2013 07:31PM
I use the 16 kdps with a 16 aero on my personal spinning builds all of the time. Unfortunately the 17 aero and 17 kdps I purchased about a year ago are not compatible. It will screw down, but way too tight for me to even consider. Maybe they have changed since then? Hopefully so, cause I got big mitts and the bigger seat feels real nice.. I dont know about the hps 17.
maybe someone else knows?? Re: Reel seat question
Posted by:
Paul Pipke
(---.vf.shawcable.net)
Date: December 26, 2013 10:49AM
Hey Ron, sent you an email Re: Reel seat question
Posted by:
Ron Schneider
(---.jsbrcmta02.jnboar.lr.dh.suddenlink.net)
Date: December 26, 2013 12:46PM
Hi Paul,
Check your emails. Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Sorry, only registered users may post in this forum.
|