I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Matagi Components
Posted by: George Roth (---.bois.qwest.net)
Date: November 16, 2013 11:32PM

Can you tell me where I can get Matagi components, now? I have several pieces that I need to purchase. Second question: I need some Mooseskin, 3/8" i.d. and was told that it was no longer available. Does anyone have a 24" piece, or several, that they would be willing to part with? I certainly appreciate your time in advance!

Options: ReplyQuote
Re: Matagi Components
Posted by: Spencer Phipps (---.war.clearwire-wmx.net)
Date: November 16, 2013 11:57PM

Maybe Mudhole who bought Merrick can help with the components. If no sponsor pipes up, or if no one points you in the right direction, I can let you know about a former sponsor who may be able to help.

Options: ReplyQuote
Re: Matagi Components
Posted by: George Roth (---.bois.qwest.net)
Date: November 17, 2013 12:06AM

Thanks a bunch. I'll keep watching to see where I can get the components.

Options: ReplyQuote
Re: Matagi Components
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: November 17, 2013 07:17AM

Nobody stocks Matagi, except for Matagi. I order from them a few times a year, he does custom colored painted reel seats for me. High quality products from beginning to end in his catalouge.
Mooseskin is just EVA, nothing special about it othe rthan a fancy name

Options: ReplyQuote
Re: Matagi Components
Posted by: Mark Fisher (---.lns5.fli.bigpond.net.au)
Date: November 17, 2013 03:23PM

George look up www.Matagi Components. There is an English section there and they have an online pdf. catalogue you can download. Their service is exceptionally good and the quality of products is THE best out there.

Regards
Mark
Outback Rods
Australia

Options: ReplyQuote
Re: Matagi Components
Posted by: Jon Kistler (---.44.64.122.res-cmts.t132.ptd.net)
Date: November 17, 2013 03:36PM

Does anyone know roughly how long shipping would be from Matagi to East Coast U.S.?

Options: ReplyQuote
Re: Matagi Components
Posted by: George Roth (---.bois.qwest.net)
Date: November 17, 2013 06:30PM

Billy...I was looking for a specific color that they handled. I have seen your work with EVA and I am totally impressed with your attention to detail. Did you recover from Sandy? I saw that you'd been hit pretty hard. Thank you, sir.

Options: ReplyQuote
Re: Matagi Components
Posted by: George Roth (---.bois.qwest.net)
Date: November 19, 2013 11:16AM

I have contacted Matagi directly and will hopefully get the components that I need.

Thank you for all of your help!

George

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster