SPONSORS
2024 ICRBE EXPO |
paint
Posted by:
Frank MacDonald
(---.home1.cgocable.net)
Date: November 15, 2013 12:19AM
What type or brand of paint can i use for a clear finish on a blank. This is an old rod and the varnish is yellowing Re: paint
Posted by:
Chris Tulk
(65.94.59.---)
Date: November 16, 2013 09:25AM
Hi Frank
I just painted my first graphite blank. I used Permi Color automotive paint. Then used the same brand clear coat. It turned out real nice! But I haven't weathered it yet, I just did it a few weeks ago. Re: paint
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: November 16, 2013 09:43AM
If you aren't able to do the automotive finishes, permagloss or Lumaseal can be used for this purpose. Relatively easy to apply with a foam brush.
Terry Re: paint
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: November 16, 2013 03:33PM
Hello Frank.
If you go the Permagloss or Lumaseal direction threr is an article in RodMaker (V15 I3 pg. 22. "Blank Coating Tool") that you might want to read. Happy Coating. Bob, New Bern, NC. Re: paint
Posted by:
Frank MacDonald
(---.dsl.bell.ca)
Date: November 17, 2013 08:59AM
I was viewing on youtube how to paint a blank the person was using Bullard CTX urethane with a brush and this looked good. Is there anyone on the left that carries this product. if not is there anywhere I can pick some up. Re: paint
Posted by:
bobby stout
(147.58.99.---)
Date: November 18, 2013 02:18PM
Tom has a video on how to put U40 on a carbon handle i used his method on a whole rod and it look great. Bobby Stout Bloomburg, TX Re: paint
Posted by:
Frank MacDonald
(---.dsl.bell.ca)
Date: November 19, 2013 12:58AM
How do I find the video would love to see it ?? Re: paint
Posted by:
bobby stout
(147.58.99.---)
Date: November 19, 2013 11:27AM
Hope this will lead you to it www.youtube.com/watch?v=48NHGTMgaus?
If not google Tom Kirkman youtube and it will come up. Bobby Stout Bloomburg, TX Re: paint
Posted by:
Frank MacDonald
(---.dsl.bell.ca)
Date: November 19, 2013 02:05PM
thank you Bobby for the info Sorry, only registered users may post in this forum.
|