SPONSORS
2024 ICRBE EXPO |
Leather Foregrips
Posted by:
Ted Meehan
(---.hsd1.fl.comcast.net)
Date: October 13, 2013 06:33AM
How to replace leather foregrips Re: Leather Foregrips
Posted by:
Tom Kirkman
(Moderator)
Date: October 13, 2013 07:42AM
There was an article in RodMaker not too long ago that showed how to make them, and would suffice as a good reference for replacing them as well.
................. Re: Leather Foregrips
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: October 13, 2013 09:33AM
Hello Ted & Tom.
That would be 15-5 pg. 14. "Leather Wrapped Grips". Tight Wraps. Bob, New Bern, NC. Re: Leather Foregrips
Posted by:
Tom Kirkman
(Moderator)
Date: October 13, 2013 10:07AM
Thanks, I wasn't in a place where I could look up the issue number.
............ Re: Leather Foregrips
Posted by:
James Newsome
(---.244.204.207.client.dyn.strong-sf33.as22781.net)
Date: October 13, 2013 11:30AM
Should be really easy to do. Just deconstruct what is on there now. Cut or trim back the thread that is holding it, unwind, then unwind the leather strip. Remember the steps and just go back in the reverse order with the new stuff. Re: Leather Foregrips
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: October 14, 2013 04:45PM
Hello Ted & Tom.
Ted the article covers everything from turning the cork too bonding the leather too setting the strip too binding the strips, all with a materials list and a source list for the materials needed. Tom, no problem. Bob, New Bern, NC. Re: Leather Foregrips
Posted by:
Ted Meehan
(---.hsd1.fl.comcast.net)
Date: October 14, 2013 07:29PM
How can I get a copy of the article. Perhaps someone could e mail it to me. Re: Leather Foregrips
Posted by:
Tom Kirkman
(Moderator)
Date: October 14, 2013 10:11PM
No, sending a copy of the article would be illegal.
You can get it here: [www.rodmakermagazine.com] Or search the archives on this forum and try to gather enough info to get you through. ................. Sorry, only registered users may post in this forum.
|