SPONSORS
2024 ICRBE EXPO |
Custom Eva
Posted by:
Jon Meyers
(---.sta.embarqhsd.net)
Date: October 09, 2013 11:39AM
Hiya,
I'm looking for somewhere that may build some custom EVA block that could put a name or logo printed into the middle of it. I would like to put my logo in the middle of a EVA handle but not quite sure how to put it on the EVA and keep it on there permanently Any ideas? Thanks, Jon Re: Custom Eva
Posted by:
Raymond Adams
(---.sub-70-197-0.myvzw.com)
Date: October 09, 2013 11:46AM
Inlay it. That is about the only way and Billy V. can help you with that. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Custom Eva
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: October 09, 2013 12:01PM
NAmes are VERY difficult to do in grips and time consuming. The images you can get done depend on teh amount of detail, points, colors, etc. HEre's a set of grips I made for my Mom last year with names in them: [www.rodbuilding.org] Re: Custom Eva
Posted by:
Jon Meyers
(---.sta.embarqhsd.net)
Date: October 09, 2013 12:35PM
That woul dbe exactly what I'm looking for Billy, they look great! how did you go about inlaying them? are there any tricks to the trade I should know about before I start carving away?
Appreciate it! Re: Custom Eva
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: October 09, 2013 03:28PM
Very nice work indeed Billy. I can only imagine the time and effort involved. Re: Custom Eva
Posted by:
Chester Kiekhafer
(---.client.mchsi.com)
Date: October 09, 2013 09:44PM
If anyone can do something just as Billy V. and he's probably done or will tell you why it can't be done. Chester May your line be tight and your beverages be cold! Re: Custom Eva
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: October 10, 2013 12:16AM
JOm, if you are doing it yourslef, it's nothing more than tracing the image out of one color, then digging out the outline of this inlay in the main grip. Use Weldwood contact cement to glue it in. I do it a complete diferent way where you need a scroll saw, bandsaw, and wood lathe. Re: Custom Eva
Posted by:
Jon Meyers
(---.sta.embarqhsd.net)
Date: October 10, 2013 03:30PM
Any idea who woul dcarry white eva foam blocks? Seems liek the plces I looked does not carry them Re: Custom Eva
Posted by:
Harry Kelly
(---.dyn.optonline.net)
Date: October 10, 2013 08:34PM
Billy should have the white blocks... Re: Custom Eva
Posted by:
Tom Kirkman
(Moderator)
Date: October 10, 2013 09:12PM
I assume you checked with a sponsor like Mud Hole? They would also have whatever stock they obtained from Merrick.
............... Re: Custom Eva
Posted by:
Jeff Frei
(---.cust.wildblue.net)
Date: October 18, 2013 09:03AM
Billy Does have white blocks Re: Custom Eva
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 18, 2013 09:21AM
Billy has vidios on youtube on how he does it -- Check them out Cool Bill - willierods.com Sorry, only registered users may post in this forum.
|