SPONSORS
2024 ICRBE EXPO |
G-Loomis fly blanks
Posted by:
pete secrest
(---.hsd1.mi.comcast.net)
Date: September 28, 2013 11:01PM
I have 2 G-Loomis blanks, they are F108-8 GL3 and GL2. Can anybody tell me what the difference is between the GL2 and the GL3? And about what the blanks sold for when G-Loomis was in business? I could sell both blanks built into fly rods, but I dont know what the blanks are worth.
Thanks Pete Re: G-Loomis fly blanks
Posted by:
Ross Pearson
(---.dlth.qwest.net)
Date: September 29, 2013 09:10AM
If you were to contact G Loomis, they could probably tell you the last MSRP for the blank models that you have. GL2 was standard modulus (33 million) and GL3 was second generation (IM6 or about 38 million) originally. Edited 2 time(s). Last edit at 09/29/2013 09:26AM by Ross W Pearson. Re: G-Loomis fly blanks
Posted by:
Tom Kirkman
(Moderator)
Date: September 29, 2013 09:20AM
The materials used to make those models was continually upgraded over the years. Around the time of them being discontinued, the GL2 was akin to an IM6 material and the GL3 was akin to the original IMX material.
................ Re: G-Loomis fly blanks
Posted by:
Spencer Phipps
(172.56.33.---)
Date: September 29, 2013 11:24AM
The closest I have info for was 2 years prior to no blanks. $92 for GL2, $129 for GL3, $167 for IMX. Edited 1 time(s). Last edit at 09/29/2013 04:24PM by Spencer Phipps. Re: G-Loomis fly blanks
Posted by:
pete secrest
(---.hsd1.mi.comcast.net)
Date: September 30, 2013 04:02PM
Thanks for the answers back. That should help me, Thats more than I new. Pete Sorry, only registered users may post in this forum.
|