SPONSORS
2024 ICRBE EXPO |
sanding tiger wraps
Posted by:
keith nehrke
(---.rochester.res.rr.com)
Date: September 26, 2013 03:59PM
Guys,
How important is it that the last coat of finish over the bottom layer of a Tiger Wrap be completely smooth? I have a few small areas on a long wrap that are not quite perfect. If it does need to be absolutely smooth, will it diminish the effect to sand the finish and apply another coat prior to wrapping the top layer? Thanks. Keith Re: sanding tiger wraps
Posted by:
Tom Kirkman
(Moderator)
Date: September 26, 2013 04:05PM
It doesn't have to be perfect. If you add another coat, it will only magnify the effect. The thicker the finish between the layers to more apparent the patterns will be.
................ Re: sanding tiger wraps
Posted by:
Tim Wiehe
(---.socal.res.rr.com)
Date: September 27, 2013 07:51PM
Tom's got it dead on. More is better. Sorry, only registered users may post in this forum.
|