SPONSORS
2024 ICRBE EXPO |
EVA foam discs needed
Posted by:
Pat Barnard
(---.tex.suddenlink.net)
Date: August 29, 2013 04:17PM
Does anyone have a source for eva foam discs? They need to be ~1.5" dia x 1" thick with no hole. Any comments appreciated.
Thanks, Pat Barnard Re: EVA foam discs needed
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: August 29, 2013 04:23PM
What colors? Re: EVA foam discs needed
Posted by:
Pat Barnard
(---.tex.suddenlink.net)
Date: August 29, 2013 04:37PM
Black Re: EVA foam discs needed
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: August 29, 2013 04:57PM
Are you making butt caps? If nobody has what you are looking for, let me knowand I'll see what I can do Re: EVA foam discs needed
Posted by:
Ron Schneider
(---.jsbrcmta02.jnboar.lr.dh.suddenlink.net)
Date: August 29, 2013 05:05PM
We stock the Flex Coat discs, here is a link to their site, they are not listed on ours at this time;
[www.flexcoat.com] Best wishes, Ron Schneider Schneider's Rod Shop Mountain Home, Arkansas [www.schneidersrods.com] mtnron40@yahoo.com 870-424-3381 Re: EVA foam discs needed
Posted by:
Jeremy Johnson
(---.lightspeed.gdrpmi.sbcglobal.net)
Date: August 29, 2013 07:56PM
I bought some from mudhole a while back. Re: EVA foam discs needed
Posted by:
Todd R. Vivian
(---.se.biz.rr.com)
Date: August 30, 2013 03:21PM
Ours are not 1" thick, only 1/2" but 1.5" diameter.
[www.mudhole.com] Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Sorry, only registered users may post in this forum.
|