SPONSORS
2024 ICRBE EXPO |
Choose a KL Group and you're halfway there
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: August 14, 2013 03:15PM
We recently posted information about the expanding selection of KL guides for the KR Concept and you may recall the photo of the selection was divided into groups. Fuji has provided additional information that may make the choice even easier by grouping specific guide together that, when used with NGC and/or KR, will automatically offer a nicely spaced reduction train with excellent performance.
Choose a stripper and its group with the following information in mind. The size 16 stripper groups are recommended for lighter braid applications (up to 10 and maybe 15lb), and short to medium length rods (to about 6’6â€). Use the four guide train for longer rods and/or blanks that bend deep into the bottom third. The size 20 stripper groups will be the most used, recommended for light mono or fluorocarbon and braid up to 20lb and rods from 6’6†to 7’6â€. Use the four guide train for longer rods and/or blanks that bend deep into the bottom third. The size 25 stripper groups will be primarily for mono and fluorocarbon (and perhaps very heavy braid) above 14lb and rods over 7’. Use the four guide train for longer rods, heavier blanks or blanks that bend deep into the bottom third. These guidelines are, as usual, a general outline of when and where certain groups may be used. We encourage experimentation and sharing. Please feel free to save the images to your hard drive for future reference. [www.rodbuilding.org] [www.rodbuilding.org] [www.rodbuilding.org] Re: Choose a KL Group and you're halfway there
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: August 14, 2013 04:18PM
links dont work Rolly Beenen Rovic Custom Rods Re: Choose a KL Group and you're halfway there
Posted by:
Tom Kirkman
(Moderator)
Date: August 14, 2013 04:43PM
They came up for me.
Regardless, they're on the photo page. .............. Re: Choose a KL Group and you're halfway there
Posted by:
Col Chaseling
(---.lnse1.ken.bigpond.net.au)
Date: August 14, 2013 06:00PM
Nothing but black rectangles with a red cross on two different computers on the photo page!! ESFNEM Col Port Kembla, NSW Australia Re: Choose a KL Group and you're halfway there
Posted by:
Tom Kirkman
(Moderator)
Date: August 14, 2013 06:02PM
It may be browser specific. Just go to the photo page and you should be able to see them.
............... Re: Choose a KL Group and you're halfway there
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: August 14, 2013 06:31PM
Come up for firefox Bill - willierods.com Re: Choose a KL Group and you're halfway there
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: August 14, 2013 09:41PM Sorry, only registered users may post in this forum.
|