SPONSORS
2024 ICRBE EXPO |
Batson Slim Slick Grip Butt Cap
Posted by:
Mitch Leppelmeier
(---.dsl.bcvloh.sbcglobal.net)
Date: July 24, 2013 11:49AM
Im thinking about trying the Batson Slim Slick Grip and was wondering what butt caps people have used with these to match up. If you have pictures that would be great too. Re: Batson Slim Slick Grip Butt Cap
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 24, 2013 11:56AM
Gimbal or Fuji Bulb cap also used the rounded rubber gimbal caps Re: Batson Slim Slick Grip Butt Cap
Posted by:
Mitch Leppelmeier
(---.dsl.bcvloh.sbcglobal.net)
Date: July 24, 2013 12:20PM
Barry,
Thanks for the reply. I like the idea of the bulb cap, I not a fan of gimbals. Does the bulb sit flush with the slick grip or does it slide inside? Any chance you have a pic? Re: Batson Slim Slick Grip Butt Cap
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 24, 2013 12:41PM
Here ya Go. measure the od at the butt and order cap to fit
[www.rodbuilding.org] Edited 2 time(s). Last edit at 07/24/2013 12:49PM by Barry Thomas Sr. Re: Batson Slim Slick Grip Butt Cap
Posted by:
Karry Batson
(---.wavecable.com)
Date: July 25, 2013 05:45PM
I have used the RG1-16.0 Rubber Gimbal for my RCKJB knife Jigging rods and fits perfectly [www.batsonenterprises.com]
Also most of the #20 MM butt caps fit including SBC20B or as you seem to like the BC19A fits well here [www.batsonenterprises.com] If you want to dress it up a bit go with an aluminum cap like the new ALBC20 in 4 different colors. [www.batsonenterprises.com] The last six rods I have used the new Alps Triangle butt cap and the trim ring fits perfect up against the Slim slick. Keep in mind this cap has inside diameter of .662 [www.batsonenterprises.com] Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Sorry, only registered users may post in this forum.
|