SPONSORS
2024 ICRBE EXPO |
Epoxy gliter
Posted by:
James Newsome
(---.244.204.207.client.dyn.strong-sf33.as22781.net)
Date: July 13, 2013 12:18PM
Want to add some tiny gliter to my epoxy. Not big flakes just small stuff to put a little dazzle in the coating. What is the best stuff and who has it? Re: Epoxy gliter
Posted by:
Andres Perez
(---.hsd1.fl.comcast.net)
Date: July 13, 2013 12:34PM
Any fine glitter will work. Mudhole has it too. Re: Epoxy gliter
Posted by:
Don Morse
(---.sub-70-210-65.myvzw.com)
Date: July 13, 2013 02:31PM
Most craft stores have it ______________________________________ Super Tight Lines......Don Re: Epoxy gliter
Posted by:
Ron Jennings
(---.dhcp.embarqhsd.net)
Date: July 13, 2013 06:14PM
Hey James
I've used the Flex coat Iridescent Finish System with great results and the glitter is tiny hope this helps Ron Re: Epoxy gliter
Posted by:
Glenn McMurrian
(198.7.58.---)
Date: July 13, 2013 08:35PM
Any glitter will work the smaller the better like Micro fine glitter is the best and you can fine it at most craft stores I find that a small amount works best and the colors Pearl green work best. Glenn McMurrian Re: Epoxy gliter
Posted by:
chris short
(101.172.255.---)
Date: July 13, 2013 09:08PM
I have used mudholes pearl glitter. Only need a tiny amount the pearl works with atot of thread colours Re: Epoxy gliter
Posted by:
Sergiy Korniychuk
(---.cpe.net.cable.rogers.com)
Date: July 13, 2013 11:01PM
I use multicoloured glitter from Michaels. In fact, just 30 min ago put second coat of epoxy mixed with glitter, over the first clear coat. Then will do one more without it. As stated, you dont need much of it. It will sparkle more after you put a coat or two over it. I used it over cobalt blue, looks nice. Other good combinations i had- candy apple, black, dark green, royal blue, charcoal. Did not like it much on lighter coloured thread, but still adds some sparkle and looks different from the average rod. Also, used it twice on tiger wrap- nice too. So, go ahead, give it a try. Edited 1 time(s). Last edit at 07/13/2013 11:03PM by Sergiy Korniychuk. Re: Epoxy gliter
Posted by:
Ron Hossack
(---.spkn.qwest.net)
Date: July 14, 2013 08:13AM
James Newsome Wrote:
------------------------------------------------------- > Want to add some tiny gliter to my epoxy. Not big > flakes just small stuff to put a little dazzle in > the coating. What is the best stuff and who has > it? I do a fair amount of PR casting and I use Mica Powders to color. Same stuff women use to make their own makeup, craft/art stuff. I buy what is called "Sample Size" packets for $0.95 as a little goes a real long ways. This is one of the sites I use and there 126 colors so you should find what you need color wise. [www.coastalscents.com] Re: Epoxy gliter
Posted by:
James Newsome
(---.244.204.207.client.dyn.strong-sf33.as22781.net)
Date: July 14, 2013 11:08AM
Thanks for all the suggestions. I have some good options to try now. Re: Epoxy gliter
Posted by:
Steve Satterfield
(---.ptld.qwest.net)
Date: July 14, 2013 04:11PM
I have used the glitter from Jann's Netcraft and a little goes a long way Sorry, only registered users may post in this forum.
|