I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RodMaker #16-3
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: July 01, 2013 04:21PM

Has anyone on the West Coast and in particular in WA State received their #16-3 issue of the magazine?

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: July 01, 2013 04:38PM

Got mine in CA about 10 days ago. But then, Tom always did like CA best! LOL

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Tom Kirkman (Moderator)
Date: July 01, 2013 04:44PM

The due date is the 28th of each even numbered month, some get it a week earlier, some get it a week later.

..............

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: July 01, 2013 05:19PM

Tom, the reason I asked is because you told me not to worry about the subscription expired notice that I was sent. when someone in CA gets it 10 days earlier then I begin to wonder.

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Tom Kirkman (Moderator)
Date: July 01, 2013 05:48PM

Mine just arrived last Friday and it only had to go about 20 miles. Presorted Standard mail doesn't all move at the same time. It sits in bins at the APOs and goes out when that bin gets full.

If you don't see it by first of next week just let me know and I'll mail a replacement. A few do get lost each mailing, but at this point it's not quite overdue.

............

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: July 01, 2013 06:15PM

OK, Thanks Tom

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Buzz Butters (---.dhcp.eucl.wi.charter.com)
Date: July 01, 2013 08:48PM

Randolph,
Im pretty sure my postal delivery person reads mine and then delivers it. Found a grocery list book mark in it one time..........

Buzz

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: John E Powell (---.buffalo.res.rr.com)
Date: July 01, 2013 09:30PM

Tom Kirkman Wrote:
-------------------------------------------------------
> Mine just arrived last Friday and it only had to
> go about 20 miles...

You mail yourself a magazine?

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Don Morse (---.dhcp.aldl.mi.charter.com)
Date: July 01, 2013 09:36PM

John E Powell Wrote:
-------------------------------------------------------
> Tom Kirkman Wrote:
> --------------------------------------------------
> -----
> > Mine just arrived last Friday and it only had
> to
> > go about 20 miles...
>
> You mail yourself a magazine?

I would...lol

______________________________________
Super Tight Lines......Don

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: July 01, 2013 09:56PM

I am sure the magazine is printed and sent not from Tom, but from a second source. Unless he just has too much to carry home from the office. ;>)

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Bill Sidney (---.gci.net)
Date: July 01, 2013 10:04PM

GOT IT 1 WEEK A GO ANCHORAGE ALASKA

William Sidney
AK

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Tom Kirkman (Moderator)
Date: July 01, 2013 10:20PM

I have the mailer send a copy to my home address, to my PO address and to my business address. I want to see what shape they arrive in, how long it takes, if there are any problems with the mailing covers I use, etc.

..............

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Ron Hossack (---.spkn.qwest.net)
Date: July 02, 2013 04:33PM

Randolph Ruwe Wrote:
-------------------------------------------------------
> Has anyone on the West Coast and in particular in
> WA State received their #16-3 issue of the
> magazine?

Now I'm on the far eastern edge of the state but the answer is not yet ... but mine has to take a slight detour from PO to PO before I get delivery

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Dick Ross (---.sub-70-199-131.myvzw.com)
Date: July 05, 2013 09:52AM

Ron I am in sandpoint idaho and go mine 2weeks ago.

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: John E Powell (---.buffalo.res.rr.com)
Date: July 05, 2013 07:31PM

Mine still hasn't showed up yet, Seems quite late every time, more than a week.

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Tom Kirkman (Moderator)
Date: July 05, 2013 07:34PM

It's not late.

.........

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Ron Hossack (---.spkn.qwest.net)
Date: July 08, 2013 08:45AM

Dick Ross Wrote:
-------------------------------------------------------
> Ron I am in sandpoint idaho and go mine 2weeks
> ago.
Geez Dick, still haven't gotten mine. I better check and see if my subscription has expired

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: July 11, 2013 05:06PM

End of the week and still not here.

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: John E Powell (---.buffalo.res.rr.com)
Date: July 11, 2013 06:05PM

Me either Randolph, the story of my life... always a bridesmaid but never the bride.

Options: ReplyQuote
Re: RodMaker #16-3
Posted by: Ron Hossack (---.spkn.qwest.net)
Date: July 11, 2013 06:10PM

Randolph Ruwe Wrote:
-------------------------------------------------------
> End of the week and still not here.

mine either and I went and looked at my last issue and it's my fault ... expired. Just ordered another two years

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster