I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

How is this done Part 2
Posted by: Josh Rimmer (---.se.biz.rr.com)
Date: June 28, 2013 01:55PM

Well my last post got deleted..Not sure why...Maybe its because I posted a link to an Armbreaker Rod or something. Anyways...I am looking to do something similar to the way Armbreaker does there 3D looking cross wrap. It almost looks like tuna cord that is colored and wrapped on the blank. Does anyone know how they do that??

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: June 28, 2013 06:27PM

Not sure, but it looks like the cord that Mud Hole sales. I hated the look of it myself.I am not fond of lumpy and bumpy.

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Andres Perez (---.hsd1.fl.comcast.net)
Date: June 28, 2013 08:23PM

I saw a tutorial where they show how it's done. They used a large syringe with tinted Rod Bond. I'll try to find that tutorial.

Andres Perez
Miami, Fl

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Andres Perez (---.hsd1.fl.comcast.net)
Date: June 28, 2013 08:28PM

Josh,

Un-hide your e-mail and I'll send you what I have.

AP

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Josh Rimmer (---.res.bhn.net)
Date: June 28, 2013 09:34PM

just send it to jrimmer1987@gmail.com

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Andres Perez (---.hsd1.fl.comcast.net)
Date: June 28, 2013 10:08PM

Done. I plan on trying it too. Let me know how it works out.

Options: ReplyQuote
Re: How is this done Part 2
Posted by: Josh Rimmer (---.se.biz.rr.com)
Date: December 23, 2013 12:39PM

Andres,

I am just now getting around to wanting to attempt this project. I looked back and didnt see the email from you on this process. Also if anyone else has any input on this technique please let me know!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster