SPONSORS
2024 ICRBE EXPO |
Almost a Royal blunder
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 03, 2013 04:27PM
I just glued both ends on a fly seat
Looking at it I noticed the movable hood that holds the reel ( Was Backwards ) Took out the heat gun Thought about hot water Started to heat up the end to take it off Got to stop doing 5 things at the same time Looked --- O Gee all I got to do is take the locking rings off - slide it off -- and turn it around Beating head against wall !!!!! Bill - willierods.com Re: Almost a Royal blunder
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: June 03, 2013 05:21PM
Been there. done that, but only once!! I learned to double check after that. ;>) Re: Almost a Royal blunder
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 03, 2013 05:29PM
makes ya feel real dumb
Thought I was a Been There Done That - Yet ya still got to be careful Bill - willierods.com Re: Almost a Royal blunder
Posted by:
Raymond Adams
(---.lightspeed.frokca.sbcglobal.net)
Date: June 03, 2013 09:39PM
We all like to think "measure twice and cut once" but........aint nobody perfect!
glad ya caught it (pardon the pun) before using the heat gun. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Almost a Royal blunder
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: June 04, 2013 07:02AM
Hello Bill.
Enjoy rod building, do ya? By the way don't use a brick wall. Tight Wraps. Bob, New Bern, NC. Re: Almost a Royal blunder
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 04, 2013 07:13AM
My walls have rubber padding so I don't hurt myself LOL Bill - willierods.com Re: Almost a Royal blunder
Posted by:
Mark Newcombe
(---.99-50-210.dynamic.dsl.syd.iprimus.net.au)
Date: June 05, 2013 01:57AM
Helmet is a good option for frequent head bashing. Sorry, only registered users may post in this forum.
|