SPONSORS
2024 ICRBE EXPO |
White guide trim bands
Posted by:
Eugene Moore
(---.dhcp.wrbg.mo.charter.com)
Date: May 13, 2013 08:44PM
Has anyone used white thread for trim bands on a guide winding ?
A customer requested maroon windings with white trim wraps for a fly rod and I'm wondering how that will turn out. Will the trim remain white or will it fade to clear ? I'll wrap a test but would like to know what I should anticipate. Thanks, Gene Re: White guide trim bands
Posted by:
Chris Herrera
(---.sub-174-239-197.myvzw.com)
Date: May 13, 2013 09:04PM
Eugene,
Regular white will most likely darken, even with cp. NCP white would be better, but may still darken slightly, and will be flat and paintlike in appearance ( which prob won't matter with a couple bands). I suggest several test wraps. Also, you might try silver for a couple trim bands. Chris Also, if you use regular white, and no cp, it will become mostly clear. Edited 1 time(s). Last edit at 05/13/2013 09:06PM by Chris Herrera. Re: White guide trim bands
Posted by:
Tom Kirkman
(Moderator)
Date: May 13, 2013 10:04PM
NCP white with color preserver will stay pretty white. It'll look good. Make a test wrap and see for yourself.
............... Re: White guide trim bands
Posted by:
Greg Smith
(---.jan.bellsouth.net)
Date: May 13, 2013 10:16PM
Sounds like you have a Mississippi State fan on your hands. Go Dawgs!!! Re: White guide trim bands
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 13, 2013 10:34PM
NCP white with CP on Bill - willierods.com Re: White guide trim bands
Posted by:
Chester Kiekhafer
(---.client.mchsi.com)
Date: May 13, 2013 11:18PM
I just posted a picture using NCP White with CP on it in the photo gallery.
I'm not sure how to put a link in, but if you look under my name you will find it..... Chester May your line be tight and your beverages be cold! Re: White guide trim bands
Posted by:
David Gilberg
(---.pghkny.east.verizon.net)
Date: May 14, 2013 12:24AM
Sulky Metallic thread in Prism White works great for that purpose. Re: White guide trim bands
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 14, 2013 09:55AM
I agree with David on the use of a white Metallic for consistent uniform result. Re: White guide trim bands
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: May 14, 2013 11:52AM
NCP white (size A) with scarlet red will produce a nice maroon wrap without using CP. Gudebrod
Garnet 206 or equivalent and NCP white with CP also produces nice maroon wraps. The color will be a little more solid, the non-NCP wrap will be more translucent, but the NCP trip will make a nice contrast. I use this color combination a lot as it works well with black, gray and green blanks. Terry Re: White guide trim bands
Posted by:
Michael Danek
(50.33.196.---)
Date: May 14, 2013 04:03PM
I agree on the metallic white solution, but the use of test wraps cannot be overstated. Keep in mind the entry above where the customer is displeased with rod balance. You can avoid that by giving the customer a piece of an old blank (same color!!) with various wraps on it. Re: White guide trim bands
Posted by:
Eugene Moore
(---.dhcp.wrbg.mo.charter.com)
Date: May 22, 2013 07:46PM
Thanks to all.
The Prizm white with CP is the right stuff. Sorry, only registered users may post in this forum.
|