SPONSORS
2024 ICRBE EXPO |
madeira metalics
Posted by:
Paul Luechtefeld
(---.mycingular.net)
Date: May 03, 2013 11:46AM
do they require cp. Re: madeira metalics
Posted by:
chris stevenson
(---.bltmmd.fios.verizon.net)
Date: May 03, 2013 04:34PM
no,none of the metallics should require CP,some even get a cloudy look if you get CP on them www.southriverrodsllc.com Re: madeira metalics
Posted by:
Col Chaseling
(---.lnse2.cht.bigpond.net.au)
Date: May 03, 2013 07:10PM
Hi Paul,
Be careful. It is embroidery thread designed to go through machines so it probably has got silicon on it. I have some of their holographic thread and it requires cp. Do a test with it first to see if you get fish eyes, better to be safe than sorry. ESFNEM Col Port Kembla, NSW Australia Re: madeira metalics
Posted by:
Paul Luechtefeld
(---.mycingular.net)
Date: May 03, 2013 09:50PM
Ok I will do a couple of test. Thanks Chris and Col. Re: madeira metalics
Posted by:
Paul Luechtefeld
(---.mycingular.net)
Date: May 04, 2013 03:20PM
I tested three colors of Madera metallics no fish eyes no CP Re: madeira metalics
Posted by:
Col Chaseling
(---.lnse2.cht.bigpond.net.au)
Date: May 04, 2013 05:54PM
Hi Paul,
Thanks for the info. I will be getting some shortly but it will be used in combination with the polyneon 40 which will require cp. ESFNEM Col Port Kembla, NSW Australia Re: madeira metalics
Posted by:
Paul Luechtefeld
(---.mycingular.net)
Date: May 04, 2013 06:37PM
I am using black and silver as the underwrap on a tiger wrap. The top will be neon green it will need cp. Sorry, only registered users may post in this forum.
|