SPONSORS
2024 ICRBE EXPO |
custom cork
Posted by:
Tom Lusis
(---.cpe.net.cable.rogers.com)
Date: April 04, 2013 06:08PM
Hello all,
Does anyone know of a rod builder who would build custom cork handles? I'm looked for some handles for a switch rod and cannot find anything I like in the retail market. I don't have access to a lathe or the equipment to make my own handles. Thanks, Tom. Re: custom cork
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 04, 2013 06:11PM
Register as you do here onto the Photo Page Check out the Handles section Bill - willierods.com Re: custom cork
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: April 04, 2013 06:18PM
CHECK OUT MEISER RODS. Re: custom cork
Posted by:
Jerry Cook
(---.dhcp.stls.mo.charter.com)
Date: April 04, 2013 06:45PM
I build a lot of custom handles for other rod builders. E mail me Tom and I give you some prices.
Jerry Cook Re: custom cork
Posted by:
Tom Lusis
(---.cpe.net.cable.rogers.com)
Date: April 04, 2013 07:14PM
Thanks Jerry sent you an e-mail. Re: custom cork
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: April 04, 2013 08:10PM
JP Timberlake does some awesome cork work that he sells Re: custom cork
Posted by:
Raymond Adams
(---.lightspeed.frokca.sbcglobal.net)
Date: April 04, 2013 11:17PM
JP has done a grip for me and I cant say enough! Raymond Adams Eventually, all things merge, and a river runs through it.. Re: custom cork
Posted by:
Col Chaseling
(101.174.54.---)
Date: April 05, 2013 12:26AM
JP's grips are definitely awesome and he's a nice guy to go with it. He can build you anything in cork that you could imagine.
Some of the stuff he had at the Expo. [www.rodbuilding.org] ESFNEM Col Port Kembla, NSW Australia Edited 1 time(s). Last edit at 04/05/2013 12:47AM by Col Chaseling. Re: custom cork
Posted by:
Sandy Harris
(---.ec.res.rr.com)
Date: April 05, 2013 11:04AM
You would be hard pressed to find anyone any better than J.P. Re: custom cork
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: April 06, 2013 12:12PM
Hello Tom
JP is 1st Rate!!! Bob, New Bern, NC. Re: custom cork
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: April 06, 2013 07:39PM
Tom, try the sponsors on the left as they support this board. If you don't find what you are looking for I will be glad to help if i can. I appreciate everyone's comments Re: custom cork
Posted by:
Tom Lusis
(---.cpe.net.cable.rogers.com)
Date: April 07, 2013 05:19PM
Hello all,
Thanks for all of the suggestions. best Tom. Sorry, only registered users may post in this forum.
|