SPONSORS
2024 ICRBE EXPO |
Spiral on Flipping stick
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: March 29, 2013 02:33PM
There has been discussion on not using the simple spiral on a flipping stick. What method do most of you use on a flipping stick?
I have not had a problem with the simple method where we put one guide at the 90 degree mark. Using size 5 guides. Just want to be sure there is not a better way. Rolly Beenen Rovic Custom Rods Re: Spiral on Flipping stick
Posted by:
Adam Curtis
(---.static-ip.telepacific.net)
Date: March 29, 2013 02:39PM
I built a MHX FS906 punch rod with simple spiral and size 5 fly runners. It's a beast! Re: Spiral on Flipping stick
Posted by:
Tom Kirkman
(Moderator)
Date: March 29, 2013 02:50PM
I used it for many years and never once had a complaint. Many times I left out the 90 degree guide, however.
............. Re: Spiral on Flipping stick
Posted by:
Rolly Beenen
(---.ontariopowergeneration.com)
Date: March 29, 2013 02:59PM
Thanks. That is what I thought that there should not be a problem with it. Rolly Beenen Rovic Custom Rods Sorry, only registered users may post in this forum.
|